High frequency power supply to improve operation stability of linear electron accelerator
DOI:
https://doi.org/10.5377/nexo.v34i04.12697Keywords:
Linear Electron Accelerator, Biperiodic Slowing System, Standing Wave, Phase Shifter, Generator, T-Junction, Waveguide BridgeAbstract
The use of linear electron accelerators in medicine and industry is explained by the simplicity of the input and output of accelerated electrons and adjusting the energy and dose rate, as well as the high dose rate of bremsstrahlung. The purpose of this work is to increase the stability of their work. A standing wave accelerator containing a high-frequency generator, a phase shifter, a waveguide bridge, a high-frequency load, and an accelerating system of two accelerating sections is equipped with two waveguide tees. Their inputs are connected to the output arms of the waveguide bridge, and the first and second output arms of each tee are connected to the first and last accelerating cells of each section, respectively. In this system, due to the introduction of several elements that do not require large costs for manufacturing and tuning, a significantly greater frequency separation of the operating mode of oscillations from neighboring ones is ensured, or even a single-frequency excitation mode is implemented, which makes it possible to significantly increase the stability of the accelerator operation. This technique can be used to increase the stability of operation in the design and calculation of linear accelerators of electrons with a standing wave.
Downloads
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2021 Universidad Nacional de Ingeniería
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
The authors who publish in Nexo Scientific Journal agree to the following terms:
- Authors retain the copyright and grant the journal the right of the first publication under the license Creative Commons Attribution License https://creativecommons.org/licenses/by/3.0/, which allows others to share the work with a recognition of the authorship of the work and the initial publication in Nexo Scientific Journal.
- Authors may separately establish additional agreements for the non-exclusive distribution of the version of the work published in the journal (for example, in an institutional repository or a book), with the recognition of the initial publication in Nexo Scientific Journal.
- Authors are allowed and encouraged to disseminate their works electronically (for example, in institutional repositories or in their own website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published works.